Urethane Bridle Rolls

Urethane bridle rolls offering a wide range of durometers and surface finishes to achieve the highest co-efficient of friction with the best
roll life.

Urethane Blocker Rolls

Specially formulated material designed to handle very high loads without damage to the urethane covering and the urethane bond to steel core.

Fiberglass Blade Rolls

Urethane covered blade rolls for the fiberglass chopping industry.  These rolls are inexpensive  and have a quick turnaround for recovering.  Any spacing can be made.

Custom Urethane Table
Conveyor Rolls

Specially formulated table and bed roll conveyor covers designed to minimize urethane shaving from lead edges and sharp edges. Coverings are formulated for heavy abuse in the looping conveyor area.

Custom Urethane Conveyor Rolls

Custom conveyor coverings to any size diameter and face length. Diameters can be made to odd sizes or cast finished to standard diameters.

Custom Urethane Conveyor Rolls

Custom conveyor coverings to any size diameter and face length. Diameters can be made to odd sizes or cast finished to standard diameters.

Urethane Plate with Steel Backing

Urethane plates with steel backing.  The steel can have a border for welded attachment or countersunk bolt holes for bolt attachment.

Urethane Plates Steel Back

Urethane plates with steel backing.  The steel can have a border for welded attachment or countersunk bolt holes for bolt attachment.

Urethane Side Trimmer Chute Liners

Side trimmer chute liners are made to cut down noise from side scrap and protect the trimmer chute from damage. Liners are made to fit in the trimmer chute.

Non-Rotating Stabilizer Sleeve

Urethane stabilizer used in the oil drilling industries .Universal Urethane can make your key drilling parts by reverse engineering your existing part. No prints are required. Universal Urethane uses a specially blended material to hold up to the toughest applications.

Solid Urethane V-Roll

Urethane V-rolls are designed to be slid over a steel core.  These rolls can be kept in stock and the covering can be quickly changed.

Custom Urethane Conveyor Rolls

Custom conveyor "V" roll for steel pipe and tube industry. We can make covering bonded to metal core or in the form of a sleeve for field installation.

Corrugated Feed Rolls

Original manufacturer of no-crush feed rolls for corrugated box industry.  All sizes for all types of folding box equipment.

Urethane Gears

Gears made from urethane are low cost in comparison to metal and plastic gears.  Urethane gears will shear when a machine jams saving further machine damage.

Custom Molded Urethane Hammers

Custom molded urethane hammers and mallets for all industries.  The urethane offers a non-sparking head and superior life to rubber hammers and mallets.

Urethane Core Plugs

Urethane core plugs are inexpensive in comparison to machined plastic and last practically forever.  Core plugs can be molded in any custom shape and size.

Urethane Suction Cup

Urethane suction cups for can manufacturing and plate glass handling.  Standard sizes available and custom molded cups can be made.

Press on Urethane Conveyor Roll

Urethane roll coverings for conveyor rolls designed to be pressed on steel roll.  Roll coverings can be kept in stock and roll does not need to be sent in for recovering.

Urethane Covered Belt Pulley

Urethane covered belt pulleys are made with or without crown for belt guidance. Rolls can be made with a rough finish for grip.

Urethane Covered Guide Wheel

Guide wheel coverings are designed for high speeds and high load bearing capabilities.

Belt Sander Drive Wheel

Drive wheels for belt sanders in either dry or water environments.  Rolls can be grooved and tapered for added grip.  Urethane belt sander wheels outlast rubber wheels by about 8 times.

Urethane Segment
(Serpentine Design)

Urethane segments for adapting mandrel segments to larger sizes.  Urethane segments will not chip or break like plastic.  Urethane segments are custom made to fit any mandrel size and shape.

Urethane Segment
(Pumpkin Tooth Design)

Urethane segments for adapting mandrel segments to larger sizes.  Urethane segments will not chip or break like plastic.  Urethane segments are custom made to fit any mandrel size and shape.

Urethane Unwind Segments

Urethane segments for adapting mandrel segments to larger sizes.  Urethane segments will not chip or break like plastic.  Urethane segments are custom made to fit any mandrel size and shape.

Steel Mill C Hook Urethane Covered

“C” hooks can be covered directly to the metal hooks if pads cannot be bottled or welded to the metal hook. Totally covering the hook gives complete protection when lifting steel and aluminum coils.

Urethane Coil Support

Custom designed coil supports to replace wooden supports.  Urethane coil supports are oil and cut resistant and can be made in various colors for safety.

Urethane Coil Block

Custom designed coil blocks to replace wooden supports.  Urethane coil blocks are oil and cut resistant and can be made in various colors for safety.  Coil blocks can also be used to store work rolls.

Urethane Slitter Rings

Urethane slitter rings are oil and cut resistant for increased life without swelling.  Rings can be made in dual durometers and any color.

Urethane Slitter Spacer Rings

Urethane slitter spacers can be made in ring form or bonded directly to a metal hub. Tight tolerances are held on the width and on the inside of the rings.

Urethane Slitter Spacer Rings

Urethane slitter spacers can be made in ring form or bonded directly to a metal hub. Tight tolerances are held on the width and on the inside of the rings.

Custom Urethane Chute Liner

Urethane chute liners custom made to fit any chute. Durometers from 75 shore “D” to 80 durometer shore “A”.

Custom Urethane Glass Rack Liner

Rack liners made to transport plate glass and solar panels. Rack liners are formulated to resist wear and tear from sharp edges on plate glass and solar panels.

Urethane Dunnage Bars

Urethane dunnage parts for the auto and plate glass industries.  Dunnage parts are used for transportation and storage.

Custom Urethane Tubes

Custom size urethane tubing for protection and roll covering usage. We can custom make tubing to any size inside or outside diameter.

Urethane Filler Sleeves
and Expander Rings

Urethane filler sleeves and expander rings used to quickly buildup any reel to another diameter.  Available with gripper bar slots if needed.

Chopper Cot

Chopper cots for fiberglass chopping industry.  We have specially designed formulas for long cot life and high quality glass cut.

Urethane Shaker Screen

Urethane shaker and sizing screens for rock and gravel sorting machinery.  Screens are made with all sizing holes and can be made to custom shapes.

Urethane Muller Liners

Standard sized muller liners are available. Liners can be custom made to any sized liners that may be required.  Urethane offers superior life versus a rubber muller liner.

Urethane Muller Wheel

Urethane covered muller wheels extend the life of the muller wheel by having the urethane in contact with sand instead of the steel muller wheel.  Urethane coverings are abrasive resistant and can be refurbished when worn.

Snow Plow

Zero-thane snow plow blades have higher abrasion resistance than rubber blades. Zero-thane snowplow blades are made in custom sizes and standard sizes.

Urethane Pallet Caps

Urethane Pallet caps provide protection for stored coils of steel and aluminum.  Pallet caps are made to fit over any size or shape pallet.